Προσοχή λόγω έλλειψης προϊόντων και αδυναμίας παράδοσης από κάποιους προμηθευτές θα παρακαλουσαμε να ΜΗΝ ΒΑΖΕΤΕ ΣΤΟ ΚΑΛΑΘΙ ΓΙΑ ΑΓΟΡΑ ΠΡΟΙΝΤΑ ΑΝ ΔΕΝ ΓΡΑΦΟΥΝ ΠΡΑΣΙΝΗ ΕΝΔΕΙΞΗ ΚΑΙ ΕΤΟΙΜΟΠΑΡΑΔΟΤΟ
Καλό θα ήταν να προηγηθεί επικοινωνία

GMT G7921

GMT G7921

7.56 Με φπα 24%

In stock

7.56 Με φπα 24%

Κωδικός : 30-cha-CIC177 | Τηλεφωνήστε για πιο σίγουρα στο: 2102799890 ή στο email:info@technoshop.gr)

Availability: Με παραγγελία 4-10 εργάσιμες | Επικοινωνήστε 2102799890 | info@technoshop.gr Κωδικός προϊόντος: 30-cha-CIC177

Περιγραφή

GMT G7921

Περιγραφή:

The G7921 contains 3 precise digital thermometers, one fan controllers, hardware and software thermal shutdown, and a system-reset circuit. The thermometers report the temperature of 3 remote sensors. The remote sensors are diode-connected transistors typically a low-cost, easily mounted 2N3904 NPN type or the diode built-in in CPU. Remote accuracy is ±1°C for multiple transistor manufacturer. The G7921 also support offset adjust function via SMBus to fix the error due to different CPU diode or parasitic resistors. The 2-wire serial interface accepts standard System Management Bus (SMBusTM) Write Byte, Read Byte, Send Byte, and Receive Byte commands. The SMBus address is 7ah for write and 7bh for read, and supports writting protection function by command 20h to prevent error behavior of µP. G7921 contains one fan controllers. FAN1 controller performs closed-loop and open-loop control. G7921 determines the current fan speed based on the FG inputs and an externally supplied 32.768KHz clock. The driving ability of FAN1 is 500mA. G7921 also provide ALERT for fan fail and out of control event. The G7921 provides hardware and software thermal shutdown. The hardware thermal shutdown is for the sensor 2. The trigger point is set by external resistors. The trigger points of software thermal shutdown are set via SMBus. If thermal shutdown event occurs, THERM pin outputs low. The G7921 contains a microprocessor (µP) supervisory circuit used to monitor the power supplies in µP and digital systems. Reset threshold is set to 4.38V typical.

Compatible with: 

_____________________________________________________________________

Προσοχή τα συγκεκριμένα προϊόντα συνήθως δεν είναι ετοιμοπαράδοτα στο κατάστημα μας

Έρχονται  από τον  προμηθευτή μας κατόπιν παραγγελίας σε 1-3 εργάσιμες στο

κατάστημα μας και σε  2-4 εργάσιμες  στον χώρο σας

Κωδικός : 30-cha-CIC177

 

+++++——-5555-xmt  4.20  xmt55555—–+++++

 

Τηλεφωνήστε για πιο σίγουρα στο: 2102799890 ή στο email:info@technoshop.gr) | Αν πληρώσετε με Paypal, Πιστωτική ή Κατάθεση τα έξοδα αποστολής είναι μόνο +5.5€. Με Αντικαταβολή για Αττική είναι +5.99 €  για εκτός Αττικής και επαρχία +7.98 €. Εάν μένετε Αθήνα μπορείτε να παραλάβετε την παραγγελία σας από το κατάστημα στην Ν. Ιωνία στην διεύθυνση 

____________________________________________________________________

Προσφορές Εβδομάδος  

_____________________________________________________________________

Δημοφιλή  

_____________________________________________________________________

 

 

GMT G7921 GMT G7921 GMT G7921

 

Τηλεφωνήστε για πιο σίγουρα στο: 2102799890 ή στο email:info@technoshop.gr) | Αν πληρώσετε με Paypal, πιστωτική ή κατάθεση τα έξοδα αποστολής εντός Αττικής είναι μόνο +2.99€ . Με Αντικαταβολή για Αττική είναι +2.99€  και για εκτός Αττικής ξεκινάνε από +5.50€ . Εάν μένετε Αθήνα μπορείτε να παραλάβετε την παραγγελία σας από το κατάστημα στην Ν. Ιωνία κατόπιν συνεννόησης στην διεύθυνση

Επιπλέον πληροφορίες

SEO EDIT

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.


Μόνο συνδεδεμένοι πελάτες που έχουν αγοράσει αυτό το προϊόν μπορούν να αφήσουν μία αξιολόγηση.